|
Home
Up
Laseraim Levels
Laseraim Alignment Tools
Laseraim Laser Modules
Laseraim Accessories
| |
LTM2HKV / LTM2UKV - LASERAIM MICRO MODULE
KITS - ADJUSTABLE FOCUS, VARIABLE-LENGTH LINE IMAGE PROJECTING
Key Benefits
 | Complete with the LTA1
Variable-Length Line Projecting Optics (patented). |
| Variable length line is user adjustable in length from a dot image at the
shortest setting to a line image that is approximately equal to the
projection distance at the longest setting. (i.e. with the laser projecting
on a surface 1 ft. away, a line length of approximately 1 ft. is possible
with the lens set to project the longest line possible. |
| Very Small Size, only 2-3/4" - 3-1/4" L (depending on line
length and focus setting) x 1" W x 1" H |
| "L" shaped mounting bracket mounts vertically or horizontally
with four screws or bolts. Eight 0.120" diameter thru mounting
holes drilled four per side of "L" bracket. |
| Accepts All Accessory Optics.
Accessory Optics are interchangeable. |
| Solid Brass and Aluminum Construction |
| 110 volt AC transformer with 6 ft. cord standard. May also be wired
direct to 3-5 volts DC. |
| High quality single lens glass optics. |
| Dot Rounding Optics available (works best at distances less than 50 ft.) see
LTA40 |
| Three-way adjustments for X&Y positioning. |
| Adjustable Focus Optics provide smaller laser dot sizes at distances less
than 25 feet. |
| "H" version HOTDOT® - 500 Ft. Max. Range or "U" version ULTRAHOT™ -
1000 Ft. Max. Range. |
Specifications
| Micro
Module Kits - Variable Length Line Projecting - LTM2"_"KV |
| Image
Projected |
Solid
laser line image with user adjustable length. The thickness of
the line is determined by the laser dot diameter. The length
of the laser line is user adjustable from 0 degrees (a dot) to
approx. 43 degrees. The length of line is adjustable from 0 to
a line length approximately the same length as the distance from the
laser to the surface it is projecting onto (projection
distance). Lasers which project an elliptical image will
produce a line which varies in length determined by the rotational
orientation of the lens to the laser source. (i.e. if the line
is oriented so that it projects parallel with the narrow axis of the
elliptical dot the line will be shorter than when oriented parallel
with the wide axis of the elliptical dot. See
the part number LTA1 for additional information. |
| Power |
110 Volt AC
transformer with six foot power cord standard. May also be
wired to customer supplied 3-5 volts DC voltage. Will
also accept the Laseraim External Remote Battery Pack #LTA20).
*Custom wire lengths available,
contact us for details. |
| Laser
/ Max. Range |
"H"
version HOTDOT® - 500 Ft. Max. Range, Class IIIa, 650nM, <5mW max,
3.5mW typical
"U" version ULTRAHOT™ -
1000 Ft. Max. Range, Class IIIa, 635nM, <5mW max, 4.75mW typical
(Maximum Range is based on single dot
projection in low ambient light conditions, use of accessory optics
and brighter ambient light conditions will greatly reduce the
range).
* All models available as Class II,
<1mW max. upon request
|
| Focus |
User
Adjustable Focus provides smaller dot sizes at distances
of 25 ft. or less. The diameter of the laser dot is directly related to
the thickness of the line image. The smallest dot size will produce the
thinnest line.
Changing the focus setting affects
the laser dot's X&Y position. |
| Smallest
Obtainable Dot Sizes / Line Thickness @ Distances |
1/64" x 1/32" @ <2"
1/32" x 1/16" @ 2"-2'
1/16" x 1/8" @ 5'
3/32" x 3/16" @ 10'
1/8" x 1/4" @ 15'
7/16" x 3/8" @ 25'
5/16" x 3/4" @ 50'
1/2" x 1-1/4" @ 100'
11/16" x 1-3/4" @ 150'
Dot Size
continues to increase proportionately at longer distances. Dot Rounding Optics available
(works best at distances less than 50 ft.) see
LTA40 |
| X
& Y Adjustments |
Three-way X / Y
adjustments for positioning the laser image after the unit is
permanently mounted |
| Accessories |
LTA2
- 90 Degree Beamsplitting Lens
LTA3
- Daylight Use Reflective Target
LTA5
- Adjustable Brightness Filter
LTA6-1
- Crosshair Projecting Lens
LTA8
- Dotted Line Lens
LTA11
- Magnetic Scale
LTA12
- Fixed-Length Line Lens, 6" line per 12" distance
LTA13
- Fixed-Length Line Lens, 8" line per 12" distance
LTA14
- Fixed-Length Line Lens, 16" line per 12" distance
LTA15
- Fixed-Length Line Lens, 28" line per 12" distance
LTA40
- Dot Rounding Optics
LTA20
- Remote Battery Pack
|
| Size
|
2-3/4" - 3-1/4" L (depending on line length and focus setting) x 1" W x 1" H
2.842" - 3.355" L
(depending on line length and focus setting) x .880" W x 1.000" H
|
Pricing
| Description |
Part # |
Price |
| MICRO MODULE KIT, VARIABLE
LENGTH LINE PROJECTING, ADJUSTABLE
FOCUS, 110 V. AC, HOTDOT |
LTM2HKV |
$ 389 |
| MICRO MODULE KIT, VARIABLE
LENGTH LINE
PROJECTING, ADJUSTABLE
FOCUS, 110 V. AC, ULTRAHOT |
LTM2UKV |
$ 539 |
| *Ask
about O.E.M. volume pricing on this product |
|
